Diamond Blades / Grinders
All blades have flanges for flush cutting.
Vacuum Brazed
For quick cutting and longevity in alabaster, limestone, marble.
| 5” Full face with flange | $89 |
| 7” Full face with flange | $139 |
| 9” V.B. Super blade with aluminum flange | $169 |
| 4.5” Convex Blade (for curved lines) | $75 |
| 3” Blade with hub for tight places | $69 |
| 2” Blade for angle grinders | $ 39 |
 3” and 4″ blade with hub |
 2″ blade for angle grinders |
Sintered for Alabaster, Limestone, Granite
| 5” Turbo for very fast cutting, with “sideburns” and flange | $79 |
| 7” Turbo for very fast cutting, with “sideburns” and flange | $99 |
| 9” Turbo for very fast cutting, with flange | $139 |
Electroplated for Marble
| 5” Full face, side coated with flange | $69 |
| 7” Full face, side coated with flange | $99 |
| 9” Premium (continuous rim) with flange | $139 |
Diamond Grinding
 |
 |
 |
 brazed 3.5″ grinding “donut” cup 30 grit |
These 3″ and 5″ disks are for shaping and finishing surfaces. As they wear, the edge can be refreshed by running it against concrete. It is used on an angle grinder.
| 3.5″ brazed diamond grinding “donut” cup – 30 grit | $75 |
| 3.5″ Cup – 25/30 grit wheel | $70 |
| 4” or 5″ – 25/30 grit with hub convex disk | $65 |
| 4.5” SEC—18 grit with hub: convex disk | $75 |
| 4.5” SEC — 30, or 50 grits, convex disk (5/8”/11) | $45 |
| 5” Cup – 25/30 grit with hub convex disk | $65 |
| 5” Sword —30 grit flat, thick “killer” for fast removal | $99 |
| 4”/4.5”/5” Blackcat flat dia. grinding wheel (30 grit). Great for convex or flat surfaces. Can be used flat for removing all high spots. | $99 |
| 4.5” Semi-Flex disk—16, 24 or 36 grits | $8 |
| Backing pads for semi-flex disks | $11 |
| Replacement “nut” for backing pad | $5 |
| 7″ Semi-Flex (ZEC) disk (no backing req.), 24 grit | $12 |
| 3″ or 5″ Trim-Kut—36, 60 or 120 grit | $3 |
| Reusable adapter (5/8”-11) | $3 |
Trim-Kut Disks
Silicon Carbide Disks
4” Semi-Flex disk
